• Unit Iv :semiconductorsapplied Physics
• Semiconductor Physics Ppt
• Semiconductor Physics And Devices Pdf

It is demonstrated in agreement with experiment that dislocation energies per unit length are proportional to d − 3 – d − 9, where d is the bond length and hardness is proportional to d − 5 – d − 1 1. It is a common unit of energy within physics, widely used in solid state, atomic, nuclear, and particle physics. It is commonly used with the metric prefixes milli-, kilo-, mega-, giga-, tera-, peta- or exa- (meV, keV, MeV, GeV, TeV, PeV and EeV respectively). SEMICONDUCTORS Applied Physics UNIT IV. CARRIER CONCENTRATION 2 Current is the rate at which charge flows. The charge carriers in a semiconductor are electrons. Powered by Create your own unique website with customizable templates.

Here you can download the free lecture Notes of Engineering Physics Pdf Notes materials with multiple file links to download. The Engineering Physics Notes Pdf book starts with the topics covering Ionic Bond, Covalent Bond, Metallic Bond, Basic Principles, Maxwell-Boltzman, Electron in a periodic Potential, Fermi Level in Intrinsic and Extrinsic Semiconductors, ElectricSusceptibility, Applications of Superconductors, QuantumConfinement, Etc.

Engineering Physics Pdf Notes 1st Year

Note : According to the JNTUH – R13 Syllabus these Engineering Physics Notes 8 units are compressed into 5 units.

Complete Notes

Link: Complete Notes

Unit 1

Link: Unit 1

Unit 2

Link: Unit 2

Unit 3

Link: Unit 3

Unit 4

Link: Unit 4

Unit 5

Link: Unit 5

Unit 6

Link: Unit 6

Unit 7

Link: Unit 7

Unit 8

Link: Unit 8

LIST OF CONTENTS

UNIT-I – Engineering Physics Notes
1. Bonding in Solids: Ionic Bond, Covalent Bond, Metallic Bond, Hydrogen Bond,
Vander-Waal’s Bond,
Calculation of Cohesive Energy.
2. Crystallography and Crystal Structures: Space Lattice, Unit Cell, Lattice
Parameters, Crystal Systems,Bravais Lattices, Miller Indices, Crystal Planes and
Directions, Inter Planar Spacing of Orthogonal CrystalSystems, Atomic Radius, Coordination
Number and Packing Factor of SC, BCC, FCC, Diamond and hcp
Structures, Structures of NaCl, ZnS, CsCl.

UNIT-II – Engineering Physics Notes
3. X-ray Diffraction: Basic Principles, Bragg’s Law, Laue Method, Powder Method,
Applications of X- ray
Diffraction.
4. Defects in Crystals: Point Defects: Vacancies, Substitutional, Interstitial, Frenkel
and Schottky Defects;Qualitative treatment of line (Edge and Screw Dislocations)
Defects, Burger’s Vector, Surface Defects andVolume Defects.

UNIT-III – Engineering Physics Notes
5. Elements of Statistical Mechanics: Maxwell-Boltzman, Bose-Einstein and
Fermi-Dirac Statistics(Qualitative Treatment), Photon gas , Wein’s Law, Rayleigh-
Jeans law, Planck’s Law of Black BodyRadiation, Concept of Electron Gas, Fermi
Energy, Density of States.
6. Principles of Quantum Mechanics: Waves and Particles, de Broglie Hypothesis
, Matter Waves,Davisson and Germer’s Experiment, G. P. Thomson Experiment,
Heisenberg’s Uncertainty Principle,Schrödinger’s Time Independent Wave Equation
– Physical Significance of the Wave Function – Particle in
One Dimensional Potential Box.

Engineering physics pdf free download

Unit Iv :semiconductorsapplied Physics

UNIT-IV – Engineering Physics Notes
7. Band Theory of Solids: Electron in a periodic Potential, Bloch Theorem, Kronig-
Penny Model (Qualitative Treatment), Origin of Energy Band Formation in Solids,
Classification of Materials into Conductors, Semi Conductors & Insulators, Concept
of Effective Mass of an Electron and Hole.

UNIT-V – Engineering Physics Notes
8. Semiconductor Physics: Fermi Level in Intrinsic and Extrinsic Semiconductors,
Intrinsic Semiconductors
and Carrier Concentration, Extrinsic Semiconductors and Carrier Concentration,
Equation of Continuity,Direct & Indirect Band Gap Semiconductors, Hall Effect.
9. Physics of Semiconductor Devices: Formation of PN Junction, Open Circuit PN
Junction, EnergyDiagram of PN Diode, I-V Characteristics of PN Junction, PN Diode
as a Rectifier (Forward and ReverseBias), Diode Equation, LED, LCD and Photo
Diodes.

Semiconductor Physics Ppt

UNIT-VI – Engineering Physics Notes

10. Dielectric Properties: Electric Dipole, Dipole Moment, Dielectric Constant,
Polarizability, ElectricSusceptibility, Displacement Vector, Electronic, Ionic and
Orientation Polarizations and Calculation ofPolarizabilities – Internal Fields in Solids,
Clausius – Mossotti Equation, Piezo-electricity, Pyro-electricity and
Ferro- electricity.
11. Magnetic Properties: Permeability, Field Intensity, Magnetic Field Induction,
Magnetization, MagneticSusceptibility, Origin of Magnetic Moment, Bohr Magneton,
Classification of Dia, Para and Ferro MagneticMaterials on the basis of Magnetic
Moment, Domain Theory of Ferro Magnetism on the basis of HysteresisCurve, Soft
and Hard Magnetic Materials, Properties of Anti-Ferro and Ferri Magnetic Materials,
Ferrites andtheir Applications, Concept of Perfect Diamagnetism, Meissner Effect,
Magnetic Levitation, Applications of Superconductors.

UNIT-VII` – Engineering Physics Notes
12. Lasers: Characteristics of Lasers, Spontaneous and Stimulated Emission of
Radiation, Meta-stableState, Population Inversion, Lasing Action, Einstein’s
Coefficients and Relation between them, Ruby Laser,Helium-Neon Laser, Carbon
Dioxide Laser, Semiconductor Diode Laser, Applications of Lasers.
13. Fiber Optics: Principle of Optical Fiber, Acceptance Angle and Acceptance
Cone, Numerical Aperture,Types of Optical Fibers and Refractive Index Profiles,
Attenuation in Optical Fibers, Application of OpticalFibers.

UNIT-VIII – Engineering physics lecture notes

14. Acoustics of Buildings & Acoustic Quieting: Basic Requirement of
Acoustically Good Hall,Reverberation and Time of Reverberation, Sabine’s Formula
for Reverberation Time(Qualitative Treatment),Measurement of Absorption
Coefficient of a Material, Factors Affecting The Architectural Acoustics and
theirRemedies. Acoustic Quieting: Aspects of Acoustic Quieting, Methods of
Quieting, Quieting for SpecificObservers, Mufflers, Sound-proofing.
15. Nanotechnology: Origin of Nanotechnology, Nano Scale, Surface to Volume
Ratio, QuantumConfinement, Bottom-up Fabrication: Sol-gel, Precipitation,
Combustion Methods; Top-down Fabrication:Chemical Vapour Deposition, Physical
Vapour Deposition, Pulsed Laser Vapour Deposition Methods

Engineering Physics Imp Questions :- Click Here for Imp Qusts

Follow us on FB – Smartzworld

Frequently Asked Question

Q1: What is Bonding and what are its types?

A1: Physical state of existing in a bound form of two or more atoms together is called Bonding. Dissociation is the external energy required to get back the bonded atoms to free state as energy is needed to break the bonds. Type of bonding in solids are,

• Primary bonds which include iconic, covalent and metallic bonding
• Secondary bonds which have Vander waal’s and hydrogen bonds.

How useful was this post?

Click on a star to rate it!

Average rating 4.6 / 5. Vote count: 37

No votes so far! Be the first to rate this post.

Learning Objectives

By the end of this section, you will be able to:

• Perform unit conversions both in the SI and English units.
• Explain the most common prefixes in the SI units and be able to write them in scientific notation.

Figure 1. The distance from Earth to the Moon may seem immense, but it is just a tiny fraction of the distances from Earth to other celestial bodies. (credit: NASA)

We define a physical quantity either by specifying how it is measured or by stating how it is calculated from other measurements. For example, we define distance and time by specifying methods for measuring them, whereas we define average speed by stating that it is calculated as distance traveled divided by time of travel.

Measurements of physical quantities are expressed in terms of units, which are standardized values. For example, the length of a race, which is a physical quantity, can be expressed in units of meters (for sprinters) or kilometers (for distance runners). Without standardized units, it would be extremely difficult for scientists to express and compare measured values in a meaningful way. (See Figure 2.)

Figure 2. Distances given in unknown units are maddeningly useless.

There are two major systems of units used in the world: SI units (also known as the metric system) and English units (also known as the customary or imperial system). English units were historically used in nations once ruled by the British Empire and are still widely used in the United States. Virtually every other country in the world now uses SI units as the standard; the metric system is also the standard system agreed upon by scientists and mathematicians. The acronym “SI” is derived from the French Système International.

Table 1 gives the fundamental SI units that are used throughout this textbook. This text uses non-SI units in a few applications where they are in very common use, such as the measurement of blood pressure in millimeters of mercury (mm Hg). Whenever non-SI units are discussed, they will be tied to SI units through conversions.

Semiconductor Physics And Devices Pdf

It is an intriguing fact that some physical quantities are more fundamental than others and that the most fundamental physical quantities can be defined only in terms of the procedure used to measure them. The units in which they are measured are thus called fundamental units. In this textbook, the fundamental physical quantities are taken to be length, mass, time, and electric current. (Note that electric current will not be introduced until much later in this text.) All other physical quantities, such as force and electric charge, can be expressed as algebraic combinations of length, mass, time, and current (for example, speed is length divided by time); these units are called derived units.

Units of Time, Length, and Mass: The Second, Meter, and Kilogram

The SI unit for time, the second(abbreviated s), has a long history. For many years it was defined as 1/86,400 of a mean solar day. More recently, a new standard was adopted to gain greater accuracy and to define the second in terms of a non-varying, or constant, physical phenomenon (because the solar day is getting longer due to very gradual slowing of the Earth’s rotation). Cesium atoms can be made to vibrate in a very steady way, and these vibrations can be readily observed and counted. In 1967 the second was redefined as the time required for 9,192,631,770 of these vibrations. (See Figure 3.) Accuracy in the fundamental units is essential, because all measurements are ultimately expressed in terms of fundamental units and can be no more accurate than are the fundamental units themselves.

Figure 3. An atomic clock such as this one uses the vibrations of cesium atoms to keep time to a precision of better than a microsecond per year. The fundamental unit of time, the second, is based on such clocks. This image is looking down from the top of an atomic fountain nearly 30 feet tall! (credit: Steve Jurvetson/Flickr)

The SI unit for length is the meter (abbreviated m); its definition has also changed over time to become more accurate and precise. The meter was first defined in 1791 as 1/10,000,000 of the distance from the equator to the North Pole. This measurement was improved in 1889 by redefining the meter to be the distance between two engraved lines on a platinum-iridium bar now kept near Paris. By 1960, it had become possible to define the meter even more accurately in terms of the wavelength of light, so it was again redefined as 1,650,763.73 wavelengths of orange light emitted by krypton atoms. In 1983, the meter was given its present definition (partly for greater accuracy) as the distance light travels in a vacuum in 1/299,792,458 of a second. (See Figure 4.) This change defines the speed of light to be exactly 299,792,458 meters per second. The length of the meter will change if the speed of light is someday measured with greater accuracy.

The SI unit for mass is the kilogram (abbreviated kg); it is defined to be the mass of a platinum-iridium cylinder kept with the old meter standard at the International Bureau of Weights and Measures near Paris. Exact replicas of the standard kilogram are also kept at the United States’ National Institute of Standards and Technology, or NIST, located in Gaithersburg, Maryland outside of Washington D.C., and at other locations around the world. The determination of all other masses can be ultimately traced to a comparison with the standard mass.

Figure 4. The meter is defined to be the distance light travels in 1/299,792,458 of a second in a vacuum. Distance traveled is speed multiplied by time.

Electric current and its accompanying unit, the ampere, will be introduced in Introduction to Electric Current, Resistance, and Ohm’s Law when electricity and magnetism are covered. The initial modules in this textbook are concerned with mechanics, fluids, heat, and waves. In these subjects all pertinent physical quantities can be expressed in terms of the fundamental units of length, mass, and time.

SI units are part of the metric system. The metric system is convenient for scientific and engineering calculations because the units are categorized by factors of 10. Table 2 gives metric prefixes and symbols used to denote various factors of 10.

Metric systems have the advantage that conversions of units involve only powers of 10. There are 100 centimeters in a meter, 1000 meters in a kilometer, and so on. In non-metric systems, such as the system of U.S. customary units, the relationships are not as simple—there are 12 inches in a foot, 5280 feet in a mile, and so on. Another advantage of the metric system is that the same unit can be used over extremely large ranges of values simply by using an appropriate metric prefix. For example, distances in meters are suitable in construction, while distances in kilometers are appropriate for air travel, and the tiny measure of nanometers are convenient in optical design. With the metric system there is no need to invent new units for particular applications.

The term order of magnitude refers to the scale of a value expressed in the metric system. Each power of 10 in the metric system represents a different order of magnitude. For example, 10¹, 10², 10³, and so forth are all different orders of magnitude. All quantities that can be expressed as a product of a specific power of 10 are said to be of the same order of magnitude. For example, the number 800 can be written as 8 × 10², and the number 450 can be written as 4.5 × 10². Thus, the numbers 800 and 450 are of the same order of magnitude: 10². Order of magnitude can be thought of as a ballpark estimate for the scale of a value. The diameter of an atom is on the order of 10^-9m while the diameter of the Sun is on the order of 10⁹m.

The Quest for Microscopic Standards for Basic Units

The fundamental units described in this chapter are those that produce the greatest accuracy and precision in measurement. There is a sense among physicists that, because there is an underlying microscopic substructure to matter, it would be most satisfying to base our standards of measurement on microscopic objects and fundamental physical phenomena such as the speed of light. A microscopic standard has been accomplished for the standard of time, which is based on the oscillations of the cesium atom.

The standard for length was once based on the wavelength of light (a small-scale length) emitted by a certain type of atom, but it has been supplanted by the more precise measurement of the speed of light. If it becomes possible to measure the mass of atoms or a particular arrangement of atoms such as a silicon sphere to greater precision than the kilogram standard, it may become possible to base mass measurements on the small scale. There are also possibilities that electrical phenomena on the small scale may someday allow us to base a unit of charge on the charge of electrons and protons, but at present current and charge are related to large-scale currents and forces between wires.

The vastness of the universe and the breadth over which physics applies are illustrated by the wide range of examples of known lengths, masses, and times in Table 1.3. Examination of this table will give you some feeling for the range of possible topics and numerical values. (See Figure 5 and Figure 6.)

Figure 5. Tiny phytoplankton swims among crystals of ice in the Antarctic Sea. They range from a few micrometers to as much as 2 millimeters in length. (credit: Prof. Gordon T. Taylor, Stony Brook University; NOAA Corps Collections)

Figure 6. Galaxies collide 2.4 billion light years away from Earth. The tremendous range of observable phenomena in nature challenges the imagination. (credit: NASA/CXC/UVic./A. Mahdavi et al. Optical/lensing: CFHT/UVic./H. Hoekstra et al.)

It is often necessary to convert from one type of unit to another. For example, if you are reading a European cookbook, some quantities may be expressed in units of liters and you need to convert them to cups. Or, perhaps you are reading walking directions from one location to another and you are interested in how many miles you will be walking. In this case, you will need to convert units of feet to miles.

Let us consider a simple example of how to convert units. Let us say that we want to convert 80 meters (m) to kilometers (km).

The first thing to do is to list the units that you have and the units that you want to convert to. In this case, we have units in meters and we want to convert to kilometers.

Next, we need to determine a conversion factor relating meters to kilometers. A conversion factor is a ratio expressing how many of one unit are equal to another unit. For example, there are 12 inches in 1 foot, 100 centimeters in 1 meter, 60 seconds in 1 minute, and so on. In this case, we know that there are 1,000 meters in 1 kilometer.

Now we can set up our unit conversion. We will write the units that we have and then multiply them by the conversion factor so that the units cancel out, as shown:

[latex]80overline{)text{m}}times frac{text{1 km}}{1000overline{)text{m}}}=0text{.080 km.}[/latex]

Note that the unwanted m unit cancels, leaving only the desired km unit. You can use this method to convert between any types of unit.

Example 1. Unit Conversions – A Short Drive Home

Suppose that you drive the 10.0 km from your university to home in 20.0 min. Calculate your average speed (a) in kilometers per hour (km/h) and (b) in meters per second (m/s). (Note: Average speed is distance traveled divided by time of travel.)

Strategy

First we calculate the average speed using the given units. Then we can get the average speed into the desired units by picking the correct conversion factor and multiplying by it. The correct conversion factor is the one that cancels the unwanted unit and leaves the desired unit in its place.

Solution for (a)

(1) Calculate average speed. Average speed is distance traveled divided by time of travel. (Take this definition as a given for now—average speed and other motion concepts will be covered in a later module.) In equation form,

(2) Substitute the given values for distance and time.

(3) Convert km/min to km/h: multiply by the conversion factor that will cancel minutes and leave hours. That conversion factor is 60 min/hr. Thus,

Discussion for (a)

To check your answer, consider the following:

(1) Be sure that you have properly cancelled the units in the unit conversion. If you have written the unit conversion factor upside down, the units will not cancel properly in the equation. If you accidentally get the ratio upside down, then the units will not cancel; rather, they will give you the wrong units as follows:

which are obviously not the desired units of km/h.

(2) Check that the units of the final answer are the desired units. The problem asked us to solve for average speed in units of km/h and we have indeed obtained these units.

(3) Check the significant figures. Because each of the values given in the problem has three significant figures, the answer should also have three significant figures. The answer 30.0 km/hr does indeed have three significant figures, so this is appropriate. Note that the significant figures in the conversion factor are not relevant because an hour is defined to be 60 minutes, so the precision of the conversion factor is perfect.

(4) Next, check whether the answer is reasonable. Let us consider some information from the problem—if you travel 10 km in a third of an hour (20 min), you would travel three times that far in an hour. The answer does seem reasonable.

Solution for (b)

There are several ways to convert the average speed into meters per second.

(1) Start with the answer to (a) and convert km/h to m/s. Two conversion factors are needed—one to convert hours to seconds, and another to convert kilometers to meters.

(2) Multiplying by these yields

Discussion for (b)

If we had started with 0.500 km/min, we would have needed different conversion factors, but the answer would have been the same: 8.33 m/s.

You may have noted that the answers in the worked example just covered were given to three digits. Why? When do you need to be concerned about the number of digits in something you calculate? Why not write down all the digits your calculator produces? The module Accuracy, Precision, and Significant Figures will help you answer these questions.

Nonstandard Units

While there are numerous types of units that we are all familiar with, there are others that are much more obscure. For example, a firkin is a unit of volume that was once used to measure beer. One firkin equals about 34 liters. To learn more about nonstandard units, use a dictionary or encyclopedia to research different “weights and measures.” Take note of any unusual units, such as a barleycorn, that are not listed in the text. Think about how the unit is defined and state its relationship to SI units.

Check Your Understanding

1. Some hummingbirds beat their wings more than 50 times per second. A scientist is measuring the time it takes for a hummingbird to beat its wings once. Which fundamental unit should the scientist use to describe the measurement? Which factor of 10 is the scientist likely to use to describe the motion precisely? Identify the metric prefix that corresponds to this factor of 10.

2. One cubic centimeter is equal to one milliliter. What does this tell you about the different units in the SI metric system?

1. The scientist will measure the time between each movement using the fundamental unit of seconds. Because the wings beat so fast, the scientist will probably need to measure in milliseconds, or 10^-3 seconds. (50 beats per second corresponds to 20 milliseconds per beat.)

2. The fundamental unit of length (meter) is probably used to create the derived unit of volume (liter). The measure of a milliliter is dependent on the measure of a centimeter.

• Physical quantities are a characteristic or property of an object that can be measured or calculated from other measurements.
• Units are standards for expressing and comparing the measurement of physical quantities. All units can be expressed as combinations of four fundamental units.
• The four fundamental units we will use in this text are the meter (for length), the kilogram (for mass), the second (for time), and the ampere (for electric current). These units are part of the metric system, which uses powers of 10 to relate quantities over the vast ranges encountered in nature.
• The four fundamental units are abbreviated as follows: meter, m; kilogram, kg; second, s; and ampere, A. The metric system also uses a standard set of prefixes to denote each order of magnitude greater than or lesser than the fundamental unit itself.
• Unit conversions involve changing a value expressed in one type of unit to another type of unit. This is done by using conversion factors, which are ratios relating equal quantities of different units.

Problems & Exercises

1. The speed limit on some interstate highways is roughly 100 km/h. (a) What is this in meters per second? (b) How many miles per hour is this?

2. A car is traveling at a speed of 33 m/s. (a) What is its speed in kilometers per hour? (b) Is it exceeding the 90 km/h speed limit?

3. Show that 1.0 m/s = 3.6 km/h. Hint: Show the explicit steps involved in converting 1.0 m/s = 3.6 km/h.

4. American football is played on a 100-yd-long field, excluding the end zones. How long is the field in meters? (Assume that 1 meter equals 3.281 feet.)

5. Soccer fields vary in size. A large soccer field is 115 m long and 85 m wide. What are its dimensions in feet and inches? (Assume that 1 meter equals 3.281 feet.)

6. What is the height in meters of a person who is 6 ft 1.0 in. tall? (Assume that 1 meter equals 39.37 in.)

7. Mount Everest, at 29,028 feet, is the tallest mountain on the Earth. What is its height in kilometers? (Assume that 1 kilometer equals 3,281 feet.)

8. The speed of sound is measured to be 342 m/s on a certain day. What is this in km/h?

9. Tectonic plates are large segments of the Earth’s crust that move slowly. Suppose that one such plate has an average speed of 4.0 cm/year. (a) What distance does it move in 1 s at this speed? (b) What is its speed in kilometers per million years?

10. (a) Refer to Table 2: Metric Prefixes for Powers of 10 and their Symbols to determine the average distance between the Earth and the Sun. Then calculate the average speed of the Earth in its orbit in kilometers per second. (b) What is this in meters per second?

Glossary

Selected Solutions to Problems & Exercises

1. (a) 27.8 m/s (b) 62.1 mph

3. [latex]frac{text{1.0 m}}{s}=frac{1text{.}text{0 m}}{s}times frac{text{3600 s}}{text{1 hr}}times frac{1 km}{text{1000 m}}[/latex]

5. length: 377 ft; 4.53 × 10³ in. width: 280 ft; 3.3 × 10³ in.

7. 8.847 kn

9. (a) 1.3 × 10⁻⁹ m (b) 40 km/My

1. See Appendix A for a discussion of powers of 10. ↵